-
Precast Concrete Components 2.0: Project Trailer
2022/07/25
Within the project Precast Concrete Components 2.0 (PCC 2.0) an interdisciplinary team develops novel circular economy processes to reuse concrete components of obsolete buildings. The project aims at overcoming linear material flows within architectural construction and avoiding further exploitation of scarce resources. The team digitizes and disassembles buildings and transforms them into refurbished components: PCC 2.0 – Precast Concrete Components 2.0.
-
Bild: PrivatBild: Privat
Veränderungen im XXL-Format
2022/07/18
Alumnus Bastian Wibranek: Vom Fachbereich Architektur an die University of Texas
Noch bevor Bastian Wibranek seine Promotion in Architektur an der TU Darmstadt 2021 abschloss, hatte er bereits eine Stelle in den USA in der Tasche. Als Assistant Professor lehrt der 38-Jährige heute „Digital Design and Fabrication“ an der University of Texas at San Antonio (UTSA). Es war die erste Stelle, für die er sich bewarb und gleich ein Traumjob. Als „nahezu perfekt“ beschreibt er die Konditionen in seiner neuen Heimat.
-
“Brown Bag”
2022/06/27
Lecture by Max Eschenbach
Max Eschenbach to lecture at the Frankfurt University of Applied Sciences on Textile Simulation & Fabrication on June 22.
-
ENSA Versailles
2022/06/27
Lecture of Oliver Tessmann at ENSA, Versailles
Oliver Tessmann to lecture at the École nationale supérieure d'architecture de Versailles on Digital Tectonic | Intelligent Assemblies on June 27.
-
Presentation Tactile Robotic Assembly
2022/06/27
Oliver Tessmann presents the Tactile Robotic Assembly project at the Popup Campus in Aachen on June 22.
-
The Future of Construction – Symposium at ETH Zurich
2022/06/27
Poster presentation Yuxi Liu and Niklas Funk
-
Lecture: Bridging the gap between Design and Production
2022/06/04
-
Oliver Tessmann to lecture at digitalBau
2022/06/01
Oliver Tessmann to lecture at digitalBau in Cologne on June 2, 2022
The lecture presents modular constructions and their assembly and disassembly through robots.
-
Computerbasiertes Entwerfen in der Kreislaufwirtschaft
2022/05/16
Die Sto-Stiftung fördert Forschungsprojekt „Design with Debris“
Wie kann computerbasiertes Entwerfen dazu beitragen, diese Materialien wieder in den Nutzungskreislauf zurückzuführen?
-
Bild: ©2022 MiQua. Köln, RGM Köln, Budapest University of Technology and Economics, TH KölnBild: ©2022 MiQua. Köln, RGM Köln, Budapest University of Technology and Economics, TH Köln
Rom am Rhein
2022/05/10
Ausstellung zeigt virtuelle Rekonstruktionen aus dem antiken Köln